Sut i ddefnyddio adadansoddwr wrin
Mae dadansoddwyr wrin o werth mawr wrth wneud diagnosis o glefydau amrywiol y system wrinol, y system dreulio, systemau cardiofasgwlaidd ac endocrin, arsylwi LX, gwerthuso prognosis a gofal iechyd y boblogaeth. Defnyddir y dadansoddwr wrin ar gyfer canfod wrin, ac mae gan y canlyniadau canfod berfformiad o ran cywirdeb, cyflymder canfod, a gwrth-traws-heintio.
Sut i weithredu adadansoddwr wrin
1. Cychwyn:
Trowch ar brif bŵer y dadansoddwr wrin, gweithredwch y pŵer arddangos, pŵer yr argraffydd, a nodwch yr enw defnyddiwr a'r cyfrinair yn y blwch deialog.
2. Paratoi cyn dadansoddi:
①Check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, whether the waste liquid bucket is emptied, check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, and whether the waste liquid bucket is emptied;
②Check whether the high-concentration cleaning tank has enough high-concentration cleaning solution;
③Check the sample needle, check reagent needle, check sample stirring needle and reagent stirring rod, and confirm that there is no dirt or bending. If dirty, clean the sample needle. If bent, replace the sample needle. If there is dirt, clean the stirring rod;
④ Calibration, preparation of quality control products.
3. Dechrau canfod:
①Calibration: Place the kit calibrators for blood glucose, urea, creatinine, uric acid, and protein in the corresponding positions, click to start calibration;
②Quality control test: place it in the corresponding position and click to start the test, all items are under control for sample test;
③ The specimen is checked, and the number is placed in the corresponding detection position;
④Click the application item to apply for inspection, and click the start button to perform the inspection;
⑤Enter information in the system;
⑥ Review, print and issue reports.
4. Shutdown:
When the urine analyzer is in the "idle" state, you can click Shut Down and follow the prompts to select "Exit" to perform the shutdown operation;
